Supernatural Fossil Series - Kudu Horn Bone in Blue Resin. Scales approximate size : 4.85" x 2.00" x 0.36" inch
Finish your scales up to a 1000 grit. Apply a very thin layer of super thin glue (CA) -- we recommend Zap A Gap #PT01. You can spray mild CA accelerator like our #PT15 on the scale. Sand again from 400 grit up to 1000 grit. Inspect for lumps of CA and sand until smooth. Repeat above process with a new coat of CA. You can repeat this process up to 4 times but do not use too much CA to avoid cracking. San until you are happy with the finish. Final finish with Micron sanding paper 4000 grit - our #WD103 and buff lightly on a buffing wheel.
For more information about this or any other Giraffebone.com products go to www.giraffebone.com
*Can NOT ship outside of the United States*